Top 3 Brand in China, Main Editor of China National Standards
Top Quality PVC/TPO Roofing Membrane Certified by FM Approvals; Representative Brand and Inventor of Chinese Self-adhesive Waterproof Membranes; Presidium Member and Vice President Unit of China National Building Waterproof Association(CWA)
|
| Place of Origin: | CHINA |
| Brand Name: | JOABOA TECH |
| Certification: | CE, BBA, SGS, ISO, SIRIM |
| Model Number: | BAC-P |
| Minimum Order Quantity: | 1,000㎡ |
| Packaging Details: | With or without pallets; For 1.5mm thickness, 11,500 ㎡ can be loaded into 1x20GP if without pallets. |
| Supply Ability: | 10,000,000㎡ per Month |
| Application Methods: | Wet Application, Hot Application, Dry Application |
Bondsure™ Membrane Series
Bondsure® BAC-P CLF-Type Double-sided Self-adhesive Bituminous Waterproofing Membrane is made of HDPE Cross Laminated Film as the intermediate layer, and the two sides are respectively covered with self-adhesive rubber asphalt adhesive material and isolation film. The polymer (chain segment) in the rolling material adhesive and cement hydrate (silicate network) form (interface) interpenetrating network (IPN) structure. The cement can flow and penetrate before the initial setting, then solidification strength increases day by day, the bonding strength is enhanced. The fluidity of cement slurry realizes the micro full adhesion between the membrane and cement slurry, so that the BAC-P bituminous waterproofing material becomes the "skin" of structural concrete, even if the damage point appears, there will be no "water channel" phenomenon.
The cement can flow and penetrate before the initial setting, then solidification strength increases day by day, the bonding strength is enhanced. The fluidity of cement slurry realizes the micro full adhesion between the membrane and cement slurry, so that the BAC-P self adhesive rubber membrane becomes the "skin" of structural concrete, even if the damage point appears, there will be no "water channel" phenomenon.
1. Cost-Effective
Manufactured by patented production technology, can be bonded with unsolidified cement, to completely eliminate water-channeling.
2. Unique Wet-application Technology
BAC-P CLF-type adhesive roofing underlayment can be applied on wet or uneven substrate surface. No need of primer, not affected by the weather. Especially during rainy season, the advantage is more prominent when compared with hot-applied membrane.
3. Reliable Bonding of Overlapping Edges
As the membrane is self-adhesive type, it's very easy to do the treatment of overlapping areas.
4. Strong Bonding Strength
Membrane adhesive waterproof can be bonded tightly to the substrate, if there is local failure on the membrane, water would be confined in a limited area without fluid-channeling, which makes it much easier to repair.
5. Safe & Environmental-friendly
During construction, there is no solvent or fuel involved. Avoiding pollution, fire risks and saving resources as well.
※ Scope of Application
BAC-P CLF-type Double-sided Self-adhesive Bituminous Waterproofing Membrane can use construction methods as below: Wet Application, Hot Application, Dry Application.
1. Wet Application
2. Hot Application
3. Dry Application
※ Storage and Transport
1. Different types or specifications of products should be separated, not mixed.
2. Keep BAC-P waterproofing with bitumen dry and ventilated, protected from the sun or rain.
3. Storage temperature should not be higher than 45 ℃. Pile up the membranes flatwise whose stockpile height should not exceed five layers.
4. Prevent tilt or side pressure during transportation, and cover with felt if necessary.
5. Storage time is at least one year from manufacture date if the product is under normal storage condition.
※ Market Share
Joaboa Tech, Inventor and Representative Brand of Chinese Self-adhesive Waterproof Membrane, whose market share has ranked as Top 1 in Chinese domestic market for over 10 years, widely used in Viet Nam, Cambodia, India, etc. as well.
※ Document Download
Joaboa Tech Bondsure® BAC-P CLF-Type Double-sided Self-adhesive Bituminous Waterproofing Membrane